Sliding door track – installation of a sliding door may seem more complicated than it is, because in most cases kit is sold full, with all accessories and fixtures necessary for placement. You just have to prepare place where you will install door and have necessary tools such as drill.
Basically, to put a sliding door track just have to have free space and kit that incorporates door you’ve chosen depending on size you want. System is simple; a lane that goes to wall and usually is placed in top of span and a set of bearings, which are placed on upper edge of door to install.
If door is installed outside shape, out of a frame, at bottom of door should be placed a wheel or on floor another guide. Rail or guide is placed in position and attachment points are indicated by a pencil. With drill and a size of blocks that we will use, we make holes. Retired dust was produced when drilling, introduce some expansion plugs in holes with help of a sledgehammer and install guides.
simplest to install sliding door track, if we want to do ourselves, are those that come with factory pre – assembled drawers , as if it were a window, placing structure or frame of door in its place, properly plumbed. Then embellishing frame.