How to Lay Staircase Runners
Staircase runners – A staircase made up of several components. The stringer, backbone, supporting the tread and riser. Runner’s carpeting, which runs down the center of the staircase, serves a dual purpose as both aesthetic and preventing wear on the wood of the stairs. There are three methods for fixing a runner to a stairway: Simply cross runner down the blanket pins, by means of double-stick carpet tape, or by means of tackless strips nailed to each step. The third method is the best
Mounting the staircase runners. Tape two 2-inch pieces tackless strips together with pins facing inward to make a spacer. Make two spacers. Cut tackless strips to the length of padding and with scissors. You need two per step, the bottom step only need one. Mark, where the edges of the pad and the runner will be on each treads with a pencil. This will keep your runner centered length of the stairs. Place the spacers on the pencil marks for padding on the tread and place a segment of tackless band of spacers with pins facing down and the flat side against the riser. Place a portion of tackless strips on the tread half inch from the riser with the legs facing the riser. Nail tread, repeating at every step. Put padding on each tread, but the bottom step, and make sure it butts against tackless strip attached to the tread and folds over the nose of the tread.
Place the staircase runners face down on the bottom tread on tackless tapes and tack it in place as padding. Roll over the nose of the tread, which covers the riser that meets the floor. Attach a tackless stripe across the runner at the bottom of the riser and pull the runner up and the tread, doubling the thickness and turning the runner-up in the process.
Tags: staircase runners.