Deck railing height – Building a deck is a project many homeowners choose to do themselves. It is important to take into account the Connecticut building code requirements when designing your structure. This is to provide protection from falling off the deck and possibly harm a family member or guest. Deck railings are an integral part of each tire system and provide a first line of defense against injuries from falls. As such, deck railings strictly regulated by local building standards departments and are subject to inspection, even if the rest of the project is not.
Deck railing height, deck railing must be at least 36 inches from the top of the deck boards to the top of the railing, measured vertically. The railing may exceed 36 inches high if the owner wishes, but there are no exemptions from the minimum height rule.
Guard openings deck railing height, the openings between each spindle in the guard must be less than 4 inches. According to the building code, a 4-inch sphere cannot pass through the guard anywhere. There should be no horizontal wood members installed between the protective spindles to prevent climbing. Spiders should be secured in a way that makes them difficult to remove. Several long wood screws through the top and bottom will accomplish this.