Deck rail planter box – build deck rail planter box is so easy that you can build several in a day, and each one of them will be solid, robust and ready for planting. Then, when you sit on the deck and enjoying the scenery, you can also enjoy your “hanging” garden. We’ll use a basic design size of 3 meters with a foot, but you can vary this size according to your needs.
Instructions to build deck rail planter box: Firstly, create the first angle of the box. Please, place three-foot planks on the edges of 3 feet by 8-inch cedar board. Make sure the edges are flush along both sides, then using the screw gun and screws; attach the plates from the bottom. You will now have two sides of a 6-inch wide box. Insert two 6 inches by 6-inch planks on the open pages. First attach them to the base, and then to the sides of the three-foot board. You now have a 6-inch wide by three-foot long cedar box.
Drill holes through the bottom of the box for drainage. Offset these holes over the entire base. They should all be about 2 inches apart. Attach the box to the deck in the location of your choice. Using 2-inch screws and screw gun, attach this box to any part of the railing you want, making sure it is flush with the top. After that, fill with soil and plant. And your deck rail planter box was used and ready to enjoy now.